Omega Plus Type H Abatement Vacuum
The lower-priced Atrix Omega Plus Type-H Abatement Vacuum is a portable, lightweight choice for hazardous particulate clean-up where asbestos certification is not required. It uses a high-performance motor and includes a 1 US gallon (3.8L) ULPA filter as standard. Built using high-impact, flame-retardant polymer for durability, it also features overheat protection.
Best for
- Hazardous fine dust clean-up (non-asbestos)
- Mould remediation / spore clean-up (site procedures dependent)
- Lead dust and renovation dust control (site procedures dependent)
- General abatement tasks requiring high-grade filtration
Filtration & standards
The ULPA filter supplied with this vacuum has an efficiency rating of 99.999% at 0.12 microns and meets the H14 classification under BS EN 1822.
Performance & build highlights
- Powerful suction: 1400mm suction performance
- EMI/RFI line noise filter included
- Overheat protection for safer operation
- Compact & portable: designed for site work and service tasks
- Clear hose included: helps identify blockages quickly
What’s included (stored in the lid)
- 6' Clear Hose (for identifying blockages)
- 8' Power Cord
- Shoulder Strap
- Utility Nozzle with Brush
- Crevice Tool with Brush
- Flexible Gooseneck Tool
- 2 × Hose Plugs (to seal contents during transport)
- Filter Exhaust Air Plug
- Filter Air Intake Plug
- 12-Month Parts Warranty
110V note
The 110V version may require fitting a yellow site plug depending on your power supply. A suitable plug is supplied in the box.
Optional extras
Useful add-ons include the Vacuum Accessory Pack (often treated as single-use for hazardous jobs), the Drilling Enclosure for dust capture at source, plus carry options such as the Deluxe Vacuum Carry Bag and Backpack Harness.
Features
Electrostatic Discharge (ESD) is a very serious issue in solid state electronics. The static electricity can damage sensitive electronics within the equipment causing failures & downtime. To eliminate this issue when working in and around electronic equipment is to make sure you are using certified ESD safe products.
This shows if the selected product is ESD Safe or not.
UK/European Spec
US Spec
What's in the Box?
Your Omega Plus Type-H Abatement Vacuum arrives complete and ready for use. Everything needed for high-filtration hazardous dust clean-up (where asbestos certification is not required) is included:
Main Unit & Filtration
- Omega Plus Type-H Abatement Vacuum (230v or 110v)
- Pre-installed ULPA filter (H14 class per BS EN 1822)
- 1 US gallon (3.8L) filter setup (as standard)
- 12-month parts warranty
Hose & Accessories
- 6ft clear identification hose
- Utility nozzle with brush
- Crevice tool with brush
- Flexible gooseneck tool
Transport & Containment
- Adjustable shoulder strap
- 2× hose plugs (for safe transport)
- 2× filter plugs (intake & exhaust)
- Tool storage in vacuum lid
Power
- 8ft power cord (230v or 110v)
- 110v site use supported (see note below)
Certification note
- Not DOP tested (abatement spec)
- Not supplied as a BS 8520-3 certified asbestos vacuum
- For asbestos work, use our compliant models: Type-H asbestos vacuums
Good to Know
Accessories store inside the vacuum lid for easy transport. The hose and filter plugs help contain residue when the unit is moved between areas. If ordering the 110v version, you may need a yellow site plug depending on your site supply — a suitable plug is supplied in the box.
Frequently Asked Questions
How quickly can I receive this vacuum?
We hold UK stock on these models. Orders are normally dispatched within 1–2 working days (subject to stock), with FREE UK mainland delivery. If you need it urgently, call us and we’ll confirm the fastest option.
Is this vacuum certified for asbestos work?
No. This is an abatement vacuum and is not DOP tested, so it is not supplied as a BS 8520-3 certified asbestos vacuum. For asbestos work, choose a model marked CERTIFIED / DOP tested from our Type-H asbestos range.
What’s the difference between ULPA and HEPA filters?
- ULPA H14: typically 99.999% efficient at 0.12 microns (used on this vacuum)
- HEPA H13: typically 99.97% efficient at 0.3 microns
ULPA provides higher filtration efficiency for finer particulates, which is why it’s preferred for specialist hazardous dust applications.
Should I choose 230v or 110v?
230v: Standard UK mains voltage. Use for buildings with normal power outlets (standard 3-pin UK plug).
110v: Site safety voltage. Often required on construction sites and preferred where enhanced electrical safety is needed. The unit is supplied for 110v operation and may require a yellow 110v plug depending on your site supply (plug supplied).
What accessories are included?
Everything you need is included in the lid of the vacuum:
- 6ft clear hose for blockage identification
- 8ft power cord (230v or 110v)
- Adjustable shoulder strap
- Utility nozzle with brush
- Crevice tool with brush
- Flexible gooseneck tool
- 2× hose plugs and 2× filter plugs for transport containment
When should the ULPA filter be replaced?
Replace the filter when performance drops, the filter is damaged, or your site procedure requires a change. Where hazardous materials are involved, always follow the correct handling and disposal procedure and use appropriate PPE.
Still Have Questions?
Our technical team can help you confirm suitability, hose/accessory compatibility, and the right voltage for your site.
Call: 0800 756 1331 (Mon–Fri 9am–5pm) |
Email: info@atrixvacuums.co.uk
No reviews found
